1206 0.91R resistor model parameter large set

Based on the 1206 size and 0.91R resistance requirements you provided, combined with technical characteristics and application scenarios, the following are classification recommendations and selection suggestions:
1、 Thick film power up resistor (cost sensitive scenario)
Recommended model
EHP16FUR910JEL（Ellon）
Parameters: 0.5W, 1%, 600ppm
Features: The thick film process has low cost and is suitable for scenarios with medium precision requirements and insensitivity to temperature drift.
Applications: consumer electronics (such as mobile phone chargers), general industrial controls (such as motor drives).
EHP16JUR910JEL（Ellon）
Parameters: 0.5W, 5%, 600ppm
Features: Lower accuracy but better cost, suitable for scenarios with high tolerance for resistance fluctuations.
Application: Low end power supply, LED lighting and other non precision circuits.
2、 Metal film high-power resistor (high stability scenario)
Recommended model
ELR16FTR910DES（Ellon）
Parameters: 1W, 1%, 50ppm
Features: Metal film low-temperature drift, high power, suitable for high-precision sampling.
Application: Automotive electronics (such as BMS battery management system), industrial frequency converter current detection.
ELR16FUR910DES（Ellon）
Parameters: 0.5W, 1%, 50ppm
Features: Balancing accuracy and stability, suitable for precision instruments.
Application: Medical equipment (such as monitors), precision instruments (such as signal generators).
TRL120610FR910P05Z (Tian'er)
Parameters: 1W, 1%, 50ppm, automotive grade (AECQ200)
Features: Anti sulfurization design, passed wide temperature testing from -55 ℃ to 155 ℃.
Application: New energy vehicle motor controller, outdoor equipment (such as photovoltaic inverters).
3、 Selection decision tree
Accuracy priority: Choose metal film resistors (ELR/TRL series) with 1% accuracy to ensure accurate sampling.
Power demand:
1W: ELR16FTR910DES (industrial high current scenario)
0.5W: EHP16FUR910JEL (Low cost scenario for consumer electronics)
Special environment:
Vehicle specifications/sulfur resistance: TRL120610FR910P05Z (Tian Er)
High temperature/high humidity: ELR series metal film (50ppm temperature drift)
Cost optimization: Thick film resistors (EHP series) offer higher cost-effectiveness in non precision scenarios.
4、 Supplier recommendation
Ever Ohms:
Channels: Huanian Mall, Shunhai Technology (officially authorized, supporting procurement of vehicle specifications and models).
Advantage: TRL series sulfur resistant resistors are specifically designed for corrosive environments.
Ellon (Billion Energy):
Channels: Lichuang Mall, Yineng Official Flagship Store.
Advantages: The ELR series metal film resistors have both surge resistance and low-temperature drift characteristics.
5、 Market trend supplement
New energy demand: The demand for high-power resistors with a capacity of over 1W is increasing in car chargers (OBC) and photovoltaic MPPT controllers.
Vehicle regulation certification: AECQ200 has become a mandatory standard for automotive electronics selection, and the Tian'er TRL series has passed such certification.
If further parameter validation or sample acquisition is required, it is recommended to check real-time inventory through platforms such as Huanian Mall and Lichuang Mall.