The following is a detailed introduction and recommended model analysis of metal film surface mount resistors with 1206 packaging, resistance of 1 Ω, power of 1W, and accuracy of ± 1%. It comprehensively summarizes the core characteristics, application scenarios, and supply information of each model:
1、 Common technical specifications for resistors
Package size: 1206 (3.2mm × 1.6mm)
Key parameters: resistance 1 Ω (1R) ± 1%, rated power 1W, temperature coefficient ± 50ppm/℃
Core advantages: The metal film process provides high stability, low noise, and excellent heat dissipation, and some models enhance their surge resistance.
2、 Detailed explanation of recommended models
High surge resistance type
EGM16FT1R00DES (Billion Energy)
Features: Designed specifically for surge resistance, the pulse energy absorption capability is improved by optimizing the metal film layer and structure (such as increasing the conductive area), in compliance with IEC 6100045 standard. Working temperature range of 55 ℃~125 ℃, suitable for power input protection.
Application scenarios: Industrial frequency converter surge suppression, fast charging adapter current limiting protection.
Supply: The minimum order quantity is 5000 pieces, and the current inventory is tight (expected to be shipped by 20250723).
TGL120610F1R00P05Z (Tian'er Technology)
Features: Tian Er anti surge series, withstand voltage of 100V, low sensitivity design to reduce high-frequency interference. Complies with AECQ200 vehicle specifications and supports wide temperature operation from 55 ℃ to 155 ℃.
Application scenarios: CAN bus terminal matching for automotive ECU, ABS system current detection.
Supply: Minimum order quantity is 5000 pieces, with a unit price of approximately ¥ 0.37/piece (bulk price).
High precision alloy foil resistor
TRL120610F1R00P05Z (Tian'er Technology)
Features: Alloy foil technology achieves ± 50ppm low-temperature drift, with better resistance stability than ordinary metal film resistors. The resistance range covers 10m Ω~10 Ω, suitable for precision current sampling.
Application scenarios: power management current feedback, lithium battery protection board sampling circuit.
Supply: Ladder price ¥ 0.24 per piece (starting from 5000 pieces).
Additional explanation for other models
EAM16FT1R00DES & ELR16FT1R00DES：
No detailed parameters were provided in the search results, but based on naming rules, it is speculated to be a product of the same series as Yineng, which may focus on conventional industrial applications (such as ELR series or high resistance type).
TSL120610F1R00P05Z：
No direct data found. The Tian'er TSL series is usually a thick film resistor with similar power and accuracy, but its surge resistance and temperature drift performance may be weaker than metal film/alloy foil models.
3、 Key parameter comparison and selection suggestions
The following table summarizes the main model differences:
|Model | Type | Core Advantages | Applicable Scenarios | Batch Unit Price (5000 pieces)|
|EGM16FT1R00DES | Surge resistant metal film | High pulse energy absorption | Industrial power supply/fast charging protection | Request for quotation|
|TGL120610F1R00P05Z | Surge resistant metal film | Vehicle grade reliability (AECQ200) | Automotive electronics | ¥ 0.37|
|TRL120610F1R00P05Z | Alloy foil | ± 50ppm low-temperature drift, high sampling accuracy | Precision current detection | ¥ 0.24|
Selection suggestion:
Priority anti surge model: If there is a risk of instantaneous high voltage in the circuit (such as motor drive, power input), choose the EGM or TGL series.
Priority accuracy and temperature drift: TRL alloy foil resistors are preferred for current sampling circuits (such as DCDC converters).
Cost sensitive scenario: For conventional applications, consider using Tian'er TSL thick film resistors (not recommended), but sacrifice some of their surge resistance performance.
4、 Application scenario extension
Industrial field: The EGM series is used for suppressing IGBT switch surges in PLC modules.
Automotive Electronics: TGL series is resistant to high temperature vibration and compatible with engine compartment sensor circuits.
Consumer Electronics: The TRL series achieves high-precision current feedback in fast charging and supports PD protocol high current surge.
Supply reminder: Currently, most models require a minimum order of 5000 pieces, with a delivery cycle of approximately 12 weeks. It is recommended to prepare materials in advance.