Fuses must be certified according to safety regulations to ensure their safety and reliability, which is a key requirement for ensuring the safety of circuits and users. The following is a specific analysis:
The core purpose of safety certification
Safety certification (such as UL, CSA, VDE, CE, etc.) is a safety standard for electronic and electrical products, with core objectives including:
Verify electrical performance: Ensure that the fuse operates stably at rated current and voltage, and melts according to the design when overloaded.
Material safety: Check the fuse housing and fuse material for high temperature resistance and flame retardancy to avoid secondary fires caused by melting.
Mechanical reliability: Test the seismic and impact resistance of fuses to prevent physical damage from causing failure.
Environmental adaptability: Verify the stability of fuses in extreme environments such as high temperature and high humidity.
Risk of failure to comply with safety regulations
If unverified fuses are used, the following issues may arise:
Unreliable fuse: The actual fuse current deviates too much from the nominal value, resulting in:
Never turn on when overloaded: If the device continues to overcurrent, it may burn out the circuit or even cause a fire.
Miscarriage under normal current: Frequent power outages of equipment affect normal use.
Safety hazard: Poor quality materials may release toxic gases or generate electric arcs when melting, causing fires.
Legal risk: Most countries and regions require electronic products to pass safety certification, otherwise they cannot be sold on the market.
The practical significance of safety certification
Market access: Certification is the "passport" for products to enter the international market (such as UL certification entering the US market).
Brand trust: Certification marks (such as UL marks) are visual proof of product quality and safety.
Responsibility avoidance: Using certified products can reduce the risk of legal disputes caused by fuse failure.
Supplementary explanation for special scenarios
Non standard customized fuses: If customized fuses are needed due to special requirements, they still need to be tested by third-party organizations to ensure that the parameters meet safety requirements.
Personal DIY scenario: Although there is no legal requirement, it is recommended to prioritize certified products as safety always takes precedence over cost.
conclusion
Fuses must pass safety certification to ensure their protective function is effective and safe. Choosing certified products is a necessary measure to avoid risks and ensure the safety of life and property. In design and production, safety certification is the bottom line; In personal use, it is a manifestation of responsibility to oneself and others.